Make time of transhipment of through cargo shortens 90%

  • Time:
  • Click:120
  • source:YESCOM CNC Machining
If the clamping apparatus transhipment of through cargo on equipment is very time-consuming bad news force, so because lack flexibility and quick sex,manufacturer is met and be washed out by the market slowly. The gate of Schunk changes quickly the system solved this one problem, can make time of transhipment of through cargo shortens 90% . The newest innovation of Schunk company is a kind of gate that can be used at successive chuck changes quickly system. Use this kind to change quickly system, of pincers change time is OK from before about 5min shortened 10s (graph 1, 2) . According to the introduction of Schunk company, what the fixed gate of monomer can use this kind of high accuracy is fast change the system undertakes equiping, right now, need not any tools can realize pair of gate change. Graph 1 can realize gate to change through key-press: The newest innovation of Schunk company although to fixed chuck system, the gate that also can realize the instant changes gate of bearing of graph 2 BWT and BWW change the combination of gate can make traditional hand moves chuck of lathe of transition coming back to become to change quickly model chuck operation personnel is held through key-press move bolt, loosen safety is sold from this, release gate. Gate can be in several seconds in get changing. New gate is in close by the operation personnel buy is entered below condition, through inside the card of buy tightens a system, gate but immediateness and automatic locking. Schunk company thinks, the process is here medium, operate the factitious error of personnel to be able to avoid completely. Extremely tall gate changes can repeat precision ＜ 0.

01mm. Had this kind to change quickly system, the user also can be benefited from chuck. Schunk company says, contain what diverse mix holds rough sketch to change model gate can obtain good flexibility, the clip that covers all sorts of differring holds range. In addition, change in the light of gate, also need professional staff no longer, working error rate also got reducing. In view of these effects, all investment are inside very short time can the standard type from fixed chuck system or special model pay off in technical program. Place held different flexibility according to securing work, the fast tray that also can use a kind to contain clamping apparatus changes system, will replace the fast gate on monomer clamping apparatus to change. Through Unilock clip ran a system at 0 o'clock, the user can be besides equipment implementation whole transhipment of through cargo. Be aimed at lathe chuck, schunk company also can offer a variety of ways to raise the flexibility of equipment transhipment of through cargo and the cost that reduce transhipment of through cargo. It is reported, be aimed at groovy lathe chuck, one kind adds the assorted weapon of outfit quickly is BWT bearing gate and BWW change the combinative put oneself in another's position of gate. The combination of this kind of very economic time contains 1/16" × 90 or 1.

5mm × the pointed tine of 60, apply to the groovy chuck of large amount. Operation personnel uses 6 horn wrench, can loosen change gate, the lock decides an axis to go up and close new gate park afresh system. Of gate change to need only about 5s. The bearing face of dinky error can ensure very tall flexibility and ＜ 0.

Of 02mm but repeatability. According to the evaluation of Schunk company, compositive type gate changes quickly systematic effect is very powerful. When the workpiece of the small lot in treatment, the user can realize a variety of effectiveness: Using change quickly when chuck, of 3 gate pure change time can decrease insufficient 1min from 5min acute. In addition, still but the repeatability movement that leave out twists a soft gate. As a result of what change but repeatability is very tall, can achieve ＜ 0.

02mm, because this needs to twist a soft gate when applying first only, can use continuously next. The user is in every time in flow of transhipment of through cargo all but the time that leave out wrongs a soft gate place to need. Set soft gate twists a needs time to be 20min, so change what need time to be 4min, add twist a place to need time to be 20min, criterion every gate changes can save the time that come down to be 24min about namely. Change only everyday suppose gate, the hour charge of equipment is 100 euro, everyday time is spare it is 40 euro. If be 220 weekday, criterion fee is economic and annual can achieve 8800 euro. It is reported, compositive type gate changes quickly systematic operation is very handy: Gate of a complete set of changes to need to be less than 60s only. Schunk company Rota-S Plus hand moves chuck construction is more comfortable. Do not require any tools completely when gate changes. Change quickly model the exercise security that the safe locking device of chuck can enhance lathe, at the same time also but leave out uses expensive system and the loss that because the operation is wrong,avoid and cause. CNC Milling CNC Machining